Pressure Washing in Lockport, IL

Vinyl, aluminum, fiber cement, wood, and composite siding in Lockport accumulate a visible film of atmospheric dirt, airborne pollen from the oak canopy across Will County, mildew colonies on shaded north elevations, and black algae streaks below gutter overflow points. The difference between a bright, crisp Lockport home and a dingy-looking one is often one afternoon of professional soft washing — not a new exterior paint job.

D&D Pro Painting uses a soft-wash approach on siding: low pressure (under 500 PSI at the surface) combined with a biodegradable cleaning solution that kills mildew, algae, and bacteria at the root rather than just blasting the surface stain away. Mildew sprayed off with high pressure alone returns within weeks; mildew treated with the correct chemistry and rinsed gently stays gone for 2-3 years.

Soft washing is the correct prep before any exterior repaint. If you are planning exterior painting in Lockport, pressure washing (done right) is the first day of that project. Paint applied over dirt, chalked oxidation, or live mildew will fail within 12-18 months regardless of product quality.

Concrete driveways, stamped patios, pavers, and garage slabs in Lockport collect oil drips, tire rubber, leaf tannins, organic staining from the heavy Will County tree cover, and embedded dirt that a garden hose cannot touch. We use surface cleaner attachments (the spinning disc that fits over the concrete) to clean evenly without the striping, etching, or zebra marks you get from a wand used alone.

For concrete, we also carry degreasers for oil-stained garage slabs and a rust remover for irrigation-related staining. Pavers are cleaned gently and re-sanded with polymeric sand as an optional add-on. Stamped or colored concrete is cleaned at lower pressure to preserve the color.

Many Lockport homeowners bundle driveway pressure washing with a garage floor refresh via our epoxy flooring service in Lockport — a before-and-after transformation that takes a weekend.

Wood decks and cedar fences in Lockport require specific pressure and technique. Too much pressure fuzzes the wood grain, raises fibers, and leaves permanent gouges; too little pressure fails to open the pores for stain penetration. We use calibrated pressure (typically 1,500-2,200 PSI on wood) combined with a wood-safe cleaner and brightener to restore the natural color before staining.

Pressure washing is the required first step before our deck staining service in Lockport or fence staining in Lockport. Stain applied over dirty wood bonds poorly and fails early. Wood must be thoroughly washed, brightened, allowed to dry 2-3 days, and then stained while still receptive.

Composite decking (Trex, TimberTech, Fiberon) is pressure washed at low settings with composite-safe cleaner — never with bleach, which can discolor the material permanently. We know the correct protocol for every Lockport deck we encounter.

Gutter exterior faces accumulate vertical black streaks from oxidation and tiger striping that no garden hose removes. We use a specific gutter-cleaning detergent and soft brushes that restore the original white or bronze finish. Gutter interior cleaning (removing leaves and debris) is offered as a separate service bundled with exterior wash when requested.

Roof soft washing is offered for asphalt shingle roofs with visible black streaks from gloeocapsa magma algae. We never pressure wash a roof — shingles cannot handle it. We apply a roof-safe sodium hypochlorite solution that kills the algae at the root; rain rinses it. Most Lockport homes with visible roof streaks see dramatic improvement within 2-4 weeks as the algae dies and sloughs off.

Brick, stone, stamped concrete, pool decks, and painted surfaces each get their own pressure and chemistry. We never use one-size-fits-all settings — that is how lesser contractors damage substrates.

Correct pressure for every substrate. Soft washing for siding, medium pressure for wood, surface-cleaner discs for concrete, chemistry-only for roofs. We never damage what we clean.

Pre-paint prep expertise. Pressure washing is the single most important prep step before any exterior painting project. We wash the way it needs to be done for paint to bond and last 10-15 years.

Biodegradable chemistry. Our cleaning solutions are safe for plants, pets, and kids. We pre-wet landscaping before we start and rinse it thoroughly when finished.

Fully insured and licensed. Every Lockport pressure washing project is covered by our commercial liability insurance. Many contractors working weekends with rented equipment are not.

Bundled pricing for multiple surfaces. Combining house, driveway, patio, and deck washing into a single visit saves 15-25% vs. scheduling them separately.