Fence Staining & Painting in Lemont, IL

Fences in Lemont face the same Illinois weather extremes as decks but have one advantage: they are mostly vertical, which sheds water faster and reduces UV hours compared to horizontal deck boards. An unstained cedar fence in Lemont will silver within 6-12 months, cup and split within 3-5 years, and begin visibly deteriorating within 7-10 years. A properly stained cedar fence can push that failure point past 15-20 years.

Cedar is the most popular premium fence material in Lemont — naturally rot-resistant, accepts stain beautifully, ages well when maintained. Pressure-treated pine fences (the most common "economy" fence) require 6-12 months of weathering before first staining to let treatment chemicals leach out and the wood dry sufficiently. Composite fences (like Trex Seclusions and similar) are not stained; they are cleaned periodically and come with integrated long-term color warranties.

D&D Pro Painting specifies the correct stain based on your fence's age, species, and prior finish. Semi-transparent stains (most popular for cedar) show grain and require recoat every 3-4 years. Semi-solid stains cover some imperfections and last 4-5 years. Solid stains hide grain entirely and last 5-7 years. Each has a role — we help you choose.

Phase 1 — Fence inspection. We walk the full fence line in Lemont, noting loose boards, leaning posts, broken pickets, rot at ground contact points, popped nails, and gate-hardware issues. Carpentry repairs are itemized separately so you know exactly what is being fixed during the project.

Phase 2 — Pressure washing and brightening. We pressure wash in Lemont each fence panel at wood-appropriate pressure with deck-and-fence cleaner, followed by wood brightener to neutralize and restore natural color. This step alone dramatically changes how a gray, weathered fence looks — before any stain is applied.

Phase 3 — Drying and sanding. Wood must reach below 15% moisture content (verified with a moisture meter) before staining. Raised or fuzzed grain is lightly sanded smooth. Protruding fasteners are reseated.

Phase 4 — Stain application. Two coats applied with a combination of airless spray for speed and brush-back technique for even penetration. Spray-only application leaves lap marks and puddles; brush-only is impractical for long fence runs. Professionals use both tools at the right moments.

Phase 5 — Gates, posts, and hardware. Gate hinges, latches, and post caps get individual attention — including re-tensioning of sagging gates and replacement of rusted hardware when requested. A fence that swings properly is a fence that gets used.

Natural cedar tones. The most popular choice for cedar fences in Lemont — honey-amber semi-transparent stains that warm up after application and weather slowly to rich browns.

Warm browns and chestnut. Pair beautifully with brick homes and warm-toned landscape materials. These semi-solid stains cover some of the green tint in pressure-treated pine and add visual warmth.

Black and espresso. Increasingly popular for modern and contemporary Lemont homes. Solid-stain black fences make landscaping pop and create a sophisticated backdrop. Long-wearing: 5-7 years before recoat.

Gray and weathered tones. For homeowners who want an intentional "weathered" look without the damage of unfinished weathering. Driftwood and pebble-gray semi-transparents provide protection while delivering the aesthetic.

White solid stain. Classic picket-fence look for traditional Lemont homes. Requires more frequent recoating than darker colors (4-5 years) but offers unmatched curb appeal in the right setting.

Privacy fences (6-foot cedar or treated pine). The most common Lemont fence type and the largest surface area to stain. Pricing is linear-foot based; typical 100-foot runs trend $800-$1,800 fully prepped and stained both sides. Staining only the "front" (neighbor-facing) side to save cost is not recommended — unstained back sides fail faster and pull moisture through boards.

Picket fences (3-4 foot). Lower linear-foot cost but higher per-foot-of-wood cost because all the pickets, caps, and rails are individual elements needing careful coverage. Popular white solid stain looks classic; semi-transparent honey shows cedar grain beautifully.

Split-rail and ranch fences. Often stained with semi-transparent rustic tones to highlight the rough-hewn character. Popular in larger properties on Cook/DuPage/Will County's western edge.

Chain-link and metal fences. We do not stain these, but we paint them when requested — using rust-inhibiting metal primer and exterior enamel in black or bronze to transform utilitarian chain-link into a more polished look. This is a different service category.

Bundle pricing with deck staining. Pairing deck staining in Lemont with fence staining saves 10-15% vs. separate projects and lets us coordinate colors across both surfaces.

Correct prep. Pressure washing and brightening are mandatory before we stain. A stained fence over dirty wood fails in months; a stained fence over properly prepped wood lasts 4-7 years.

Spray + brush technique. Airless spray for speed, brush-back for penetration and even coverage. Neither tool alone does the job professionally.

Carpentry integration. We fix loose boards, leaning posts, and gate issues during the project rather than staining around damage.

Full-fence or selective. Need only a section of a long fence stained? We can coordinate color and finish so repairs blend with the rest. A complete full-fence restain is typically cheaper per foot, but we will work with any scope.